Connect the Wifx L1 with UDP Packet Forwarder

This section contains instructions for connecting the Wifx L1 gateway to The Things Stack using the Semtech UDP Packet Forwarder.

Select the UDP Packet Forwarder (ChirpStack) in the forwarder selection list.

In the Configuration pane, click Edit (blue button with a pencil).

On the Global tab of the configuration editor, set the following configuration:

  • Address: Address of your The Things Stack deployment. See Server Addresses.
  • Up port: UDP upstream port of the Gateway Server, typically 1700.
  • Down port: UDP downstream port of the Gateway Server, typically 1700.

Save the configuration and start the packet forwarder.

← Connect the Wifx L1 with Lora Basics™ Station Wifx LORIX One →