Milesight EM300-TH
The Milesight EM300-TH is an environment sensor suitable for monitoring indoor and outdoor temperature and humidity. It can be widely used in office areas, greenhouses and other environments.
Provisioning Information
For the provisioning information:
- DevEUI: Can be found on the back of the device.
- JoinEUI:
24E124C0002A0001. - AppKey: Will be received through an email after purchasing the device.
Note:
The Milesight EM300-TH cannot be onboarded to The Things Stack using QR code.Onboarding to The Things Stack
You can onboard your EM300-TH using the LoRaWAN Device Repository or manually option.
If you prefer onboarding with the LoRaWAN Device Repository, in the End device type section, under Input method, select the Select the end device in the LoRaWAN Device Repository option.
The Onboarding devices without QR codes section of the Adding Devices guide explains this procedure in detail. Following details are EM300-TH-specific:
- End device brand: Milesight IoT Co., Ltd
- Model: EM300-TH
- Hardware Ver.: V2.2
- Firmware Ver.: 1.15
Then fill in the Provisioning information, which were found in the first steps.
After configuring your device, select the Register end device button.
If you prefer onboarding manually, in the End device type section, under Input Method, select Enter end device specifics manually option. The Manually adding devices and Over the Air Activation (OTAA) guides explain this procedure in detail. Following details are EM300-TH-specific:
- LoRaWAN version: LoRaWAN Specification 1.0.3
- Regional parameters version: RP001 Regional Parameters 1.0.3 revision A
Then fill in the Provisioning information, which were found in the first steps.
After configuring your device, select the Register end device button.
