# Dragino LPS8N

> The Dragino LPS8N is a LoRaWAN® indoor gateway based on the open-source OpenWrt Linux operating system. The LPS8N provides ten programmable parallel demodulation paths. The gateway can be connected to the internet using Ethernet, WiFi, or optional Cellular (3G/4G) connectivity.

Source: https://www.thethingsindustries.com/docs/hardware/gateways/models/dragino-lps8/


![Dragino LPS8N](https://www.thethingsindustries.com/docs/hardware/gateways/models/dragino-lps8/dragino-lps8n.jpg)


The [Dragino LPS8N](https://www.dragino.com/products/lora-lorawan-gateway/item/200-lps8n.html/) is a LoRaWAN® indoor gateway based on the open-source OpenWrt Linux operating system. Its hardware is built around the SX1302 LoRa Core™ Digital Baseband Chip and the SX1250 LoRa Core™ Multi-band Sub-GHz RF Front End. The LPS8N provides ten programmable parallel demodulation paths. The gateway can be connected to the internet using Ethernet, WiFi, or optional Cellular (3G/4G) connectivity. It supports the EU868, IN865, US915, AU915, AS923, and KR920 frequency bands.

This page guides you on how to configure the Dragino LPS8N for adding on The Things Stack.

## Prerequisites

1. A user account on The Things Stack with user rights to add gateways.
2. A computer on the same network as the LPS8N.
3. The latest version of firmware running on the Dragino LPS8N. Read the Dragino LPS8N [user manual](http://wiki.dragino.com/xwiki/bin/view/Main/User%20Manual%20for%20All%20Gateway%20models/LPS8N%20-%20LoRaWAN%20Gateway%20User%20Manual/#H8.A0UpgradeLinuxFirmware) for instructions on firmware upgrade.
4. Internet access setup for the LPS8N using one of the following methods:

- Using the WAN port of the LPS8N
- As a WiFi client
- Using the built-in 4G modem

## Configuring the LPS8N

Navigate to the Web UI using one of the following addresses with a web browser:

- If you are connecting through the Wi-Fi access point generated by the LPS8N, use the default IP address `10.130.1.1`.
- If your LPS8N is connected to a router via Ethernet or Wi-Fi, use the address `http://IP_ADDRESS` or `http://IP_ADDRESS:8000`. Replace `IP_ADDRESS` with the IP address assigned to the LPS8N by the router.

When prompted for the sign-in, enter the username `root` and the password `dragino`.

![Sign In](https://www.thethingsindustries.com/docs/hardware/gateways/models/dragino-lps8/sign-in-lps8n.png)


After signing in, you will be directed to the LPS8N's Web UI.

![Web UI hime](https://www.thethingsindustries.com/docs/hardware/gateways/models/dragino-lps8/web-ui-home-lps8n.png)


## Connect to The Things Stack

After completing the basic configuration, follow the instructions to [Connect Dragino LPS8N with LoRa Basics™ Station](https://www.thethingsindustries.com/docs/hardware/gateways/models/dragino-lps8/lbs/) or to [Connect Dragino LPS8N with Semtech UDP Packet Forwarder](https://www.thethingsindustries.com/docs/hardware/gateways/models/dragino-lps8/udp/).


## Pages in this section

- [Connect Dragino LPS8N with Lora Basics™ Station](https://www.thethingsindustries.com/docs/hardware/gateways/models/dragino-lps8/lbs/index.md): This section contains instructions for connecting the Dragino LPS8N LoRaWAN® gateway to The Things Stack using LoRa Basics™ Station.
- [Connect Dragino LPS8N with UDP Packet Forwarder](https://www.thethingsindustries.com/docs/hardware/gateways/models/dragino-lps8/udp/index.md): This section contains instructions for connecting the Dragino LPS8N LoRaWAN® gateway to The Things Stack using the Semtech UDP Packet Forwarder.

