Getting Started Devices Gateways The Things Stack Integrations Reference
Get The Things Stack

Gateways

    Overview
  • Concepts
  • Models
    • Building a gateway with Raspberry Pi and IC880A
    • Browan Minuhub Pro
    • Cisco Wireless Gateway for LoRaWAN
    • CloudGate
    • Connect LORIX One with UDP Packet Forwarder
    • COTX
    • Dragino LPS8
    • Kerlink Wirnet iStation
    • Kerlink Wirnet Station
    • Laird Sentrius™ RG1xx LoRaWAN Gateway
    • MikroTik KNOT
    • MikroTik LtAP
    • MikroTik Routerboard wAP LoRa8 kit
    • Milesight UG6X LoRaWAN Gateway
    • Milesight UG8X LoRaWAN Gateway
    • MOKOSMART MKGW2-LW LoRaWAN® Gateway
    • MultiTech Conduit AEP
    • MultiTech Conduit mLinux
    • NASys LoRaWAN Outdoor Gateway
    • Peplink Balance 20X LoRaWAN (with FlexModule Mini)
    • RAK7240 WisGate Edge Prime
    • Tektelic Kona Micro IoT LoRaWAN Gateway
    • The Things Indoor Gateway
    • The Things Kickstarter Gateway
    • The Things Outdoor Gateway
    • Wifx L1
    • Wifx LORIX One
      • Connect LORIX One with Lora Basics™ Station
      • Connect LORIX One with UDP Packet Forwarder
  • Troubleshooting Gateways

Wifx LORIX One

LORIX One

The LORIX One is a robust and professional grade outdoor LoRaWAN® gateway in an ultra compact form factor, designed and assembled in Switzerland.

This page will guide you through the steps required to connect the gateway to The Things Stack.

For additional help and technical specifications, please refer to Wifx’s official documentation.

Requirements

  1. User account on The Things Stack with rights to create Gateways
  2. A Wifx LORIX One running LORIX OS connected to the network
  3. A computer, tablet or mobile phone connected to the network (to configure the gateway)

If your gateway is running legacy software, please refer to the official documentation for upgrade instructions.

Get the gateway EUI

To register the gateway, you will need its Gateway EUI. This can be found either on the gateway’s sticker or by software in the Manager UI.

From the sticker

To get the Gateway EUI from the sticker, find the MAC address printed on the sticker under the gateway. The gateway EUI corresponds to the MAC address, removing the ; and adding FFFE in the middle.

For example the MAC address

FC:C2:3D:AB:CD:EF

corresponds to a Gateway EUI of

FCC23DFFFEABCDEF

The full process for conversion is:

FC:C2:3D:AB:CD:EF => FCC23DABCDEF => FCC23D FFFE ABCDEF => FCC23DFFFEABCDEF

From the Manager UI

To get the Gateway EUI from the Manager UI, connect to your gateway and check the System > Information page. Under the System section you will see the ‘Serial number’. This serial number is the EUI.

Registration

Create a gateway in the The Things Stack Console by following the instructions for Adding Gateways. Copy the API Key to a notepad, as you will need it later.

Configuration

To connect to the LORIX One, open a web browser on your computer or device and enter the either the gateway hostname or the gateway IP address.

The hostname is lorix-one-abcdef.local where abcdef are the 6 last digits of the Gateway EUI. Hostname access is only available on networks that have mDNS enabled. On networks without mDNS, enter the IP address of the gateway in the web browser.

You will land on the login page. Log on using the following the default username admin and default password lorix4u.

LORIX One login page

Configure the antenna type

Go to the LoRa > Settings page.

LORIX One LoRa hardware page

In the Antenna field, select the antenna you have connected.

  • 2dBi is the small antenna (~20cm)
  • 4dBi is the big antenna (~40cm)
Warning:
If the antenna type is not configured, the packet forwarder will fail to start.

Configure the Packet Forwarder

After completing basic configuration, follow the instructions for connecting using LoRa Basics™ Station. It is also possible to connect the gateway usgin the legacy UDP Packet Forwarder if necessary.

Connect LORIX One with Lora Basics™ Station

This section contains instructions for connecting to The Things Stack using LoRa Basics™ Station.
Read

Connect LORIX One with UDP Packet Forwarder

This section contains instructions for connecting to The Things Stack using the Semtech UDP Packet Forwarder.
Read
← Connect the Wifx L1 with UDP Packet Forwarder Connect LORIX One with Lora Basics™ Station →

On this page

  • Requirements
  • Get the gateway EUI
  • Registration
  • Configuration
  • Configure the Packet Forwarder

The Things Stack

Getting Started

Devices

Gateways

The Things Stack

Integrations

Reference

Contributing

GitHub

About Us

The Things Industries