Getting Started Devices Gateways The Things Stack Integrations Reference
Get The Things Stack

Gateways

    Overview
  • Concepts
  • Models
    • Building a gateway with Raspberry Pi and IC880A
    • Browan Minuhub Pro
    • Cisco Wireless Gateway for LoRaWAN
    • CloudGate
    • Connect LORIX One with UDP Packet Forwarder
    • COTX
    • Dragino LPS8
    • Kerlink Wirnet iStation
    • Kerlink Wirnet Station
    • Laird Sentrius™ RG1xx LoRaWAN Gateway
    • MikroTik KNOT
    • MikroTik LtAP
    • MikroTik Routerboard wAP LoRa8 kit
    • Milesight UG6X LoRaWAN Gateway
    • Milesight UG8X LoRaWAN Gateway
    • MOKOSMART MKGW2-LW LoRaWAN® Gateway
    • MultiTech Conduit AEP
    • MultiTech Conduit mLinux
    • NASys LoRaWAN Outdoor Gateway
    • Peplink Balance 20X LoRaWAN (with FlexModule Mini)
    • RAK7240 WisGate Edge Prime
    • Tektelic Kona Micro IoT LoRaWAN Gateway
    • The Things Indoor Gateway
    • The Things Kickstarter Gateway
    • The Things Outdoor Gateway
    • Wifx L1
    • Wifx LORIX One
  • Troubleshooting Gateways

MOKOSMART MKGW2-LW LoRaWAN® Gateway

MOKOSMART’s 8 channel MKGW2 gateway is embedded with Semtech’s high performance multi-channel transceiver SX1301/SX1257 and MTK platform. It is for indoor use and is easy to install.

mkgw2-lw

Requirements

  1. User account on The Things Stack with rights to create gateways.
  2. MOKOSMART MKGW2-LW connected to the internet via Ethernet or WiFi. (For Ethernet and WiFi settings, see sections 5 and 6 of the user manual)

Registration

Create a gateway by following the instructions.

The EUI of the gateway can be found on the configuration web page of the gateway or on the device packaging.

Gateway EUI

Configuration via Browser

  1. Turn on the gateway and wait for about 60s.
  2. Using your PC or phone, connect to the WiFi Access Point exposed by the gateway. The default SSID format is MKGW2-LW-xxxx, e.g MKGW2-LW-91D8, where 91D8 are the last two bytes of the gateway MAC address. The default password is Moko4321.
  3. After a successful connection, the web management platform can be accessed through the IP address 192.168.22.1 of the gateway LAN interface.
  4. Log in using the default credentials - username Admin and password admin

It is recommended that the default password is changed for security reasons.

Login Web

Connect to The Things Stack

The MOKOSMART MKGW2-LW supports the UDP packet forwarder. Please follow instructions for connecting the UDP packet forwarder.

Do not forget to click SAVE&APPLY after you fill in the parameters. After a few seconds, your gateway should connect to The Things Stack.

For more information, you can refer to the MKGW2-LW user manual or send an email to support_lora@mokotechnology.com.

← Connect Milesight UG8X with UDP Packet Forwarder MultiTech Conduit AEP →

On this page

  • Requirements
  • Registration
  • Configuration via Browser
  • Connect to The Things Stack

The Things Stack

Getting Started

Devices

Gateways

The Things Stack

Integrations

Reference

Contributing

GitHub

About Us

The Things Industries