Getting Started Devices Gateways The Things Stack Integrations Reference
Get The Things Stack

Gateways

    Overview
  • Concepts
  • Models
    • Building a gateway with Raspberry Pi and IC880A
    • Browan Minuhub Pro
    • Cisco Wireless Gateway for LoRaWAN
    • CloudGate
    • Connect LORIX One with UDP Packet Forwarder
    • COTX
      • COTX X1
      • COTX X3
      • COTX X5
    • Dragino LPS8
    • Kerlink Wirnet iStation
    • Kerlink Wirnet Station
    • Laird Sentrius™ RG1xx LoRaWAN Gateway
    • MikroTik KNOT
    • MikroTik LtAP
    • MikroTik Routerboard wAP LoRa8 kit
    • Milesight UG6X LoRaWAN Gateway
    • Milesight UG8X LoRaWAN Gateway
    • MOKOSMART MKGW2-LW LoRaWAN® Gateway
    • MultiTech Conduit AEP
    • MultiTech Conduit mLinux
    • NASys LoRaWAN Outdoor Gateway
    • Peplink Balance 20X LoRaWAN (with FlexModule Mini)
    • RAK7240 WisGate Edge Prime
    • Tektelic Kona Micro IoT LoRaWAN Gateway
    • The Things Indoor Gateway
    • The Things Kickstarter Gateway
    • The Things Outdoor Gateway
    • Wifx L1
    • Wifx LORIX One
  • Troubleshooting Gateways

COTX

COTX product portfolio consists of IoT modules, LoRa gateways, node devices and all-in-one solutions. They offer high quality radio performances and carrier-grade security. COTX offers a few gateway versions, and instructions for all of them are available in the following sections:

  • COTX X1 (Lite) Gateway
  • COTX X3 Gateway
  • COTX X5 Gateway

COTX X1

COTX X1 is a standard LoRaWAN® indoor gateway. It is easy to install and deploy, highly compatible and has a user-friendly interface. COTX offers rich software tools, powerful back office management and technical support.
Read

COTX X3

COTX X3 gateway has similar characteristics to previously described X1 gateway, only with additional features like: Outdoor support BLE support Small screen for easy monitoring, etc. Gateway Setup Install the LoRa antenna on the LoRa Antenna Port. Place the gateway in a proper location (e.g. near a window) to have the optimum coverage and signal reception. For Ethernet access to WAN/Internet scenario, please connect the LAN port on the gateway to an existing router with an Ethernet cable.
Read

COTX X5

COTX X5 gateway has similar characteristics to previously described X1 and X3 gateways, but unlike them is an outdoor gateway intended for industrial IoT use cases, with a water and dust proof aluminium case. Gateway Setup First, carefully connect the LoRa antenna to the Lora port of the gateway the Wi-Fi antenna to the WiFi/BLE port and the LTE antenna to the LTE port. Next find a suitable location for your gateway to be positioned.
Read
← Connect LORIX One with UDP Packet Forwarder COTX X1 →

On this page

The Things Stack

Getting Started

Devices

Gateways

The Things Stack

Integrations

Reference

Contributing

GitHub

About Us

The Things Industries