v3.20.2

Getting Started Devices Gateways Integrations Reference
Get The Things Stack

Gateways

    Overview
  • Adding Gateways
  • Gateway Claiming
  • Troubleshooting Gateways
  • LoRa Basics™ Station
  • Semtech UDP Packet Forwarder
  • Bulding a gateway with Raspberry Pi and IC880A
  • Browan Minuhub Pro
  • Cisco Wireless Gateway for LoRaWAN
  • CloudGate
  • Dragino LPS8
  • Kerlink Wirnet iStation
  • Kerlink Wirnet Station
  • Laird Sentrius™ RG1xx LoRaWAN Gateway
    • Connect Laird Sentrius™ RG1xx with LoRa Basics™ Station
  • MikroTik KNOT
  • MikroTik LtAP
  • MikroTik Routerboard wAP LoRa8 kit
  • Milesight UG6X LoRaWAN Gateway
  • Milesight UG8X LoRaWAN Gateway
  • MOKOSMART MKGW2-LW LoRaWAN Gateway
  • MultiTech Conduit AEP
  • MultiTech Conduit mLinux
  • NASys LoRaWAN Outdoor Gateway
  • RAK7240 WisGate Edge Prime
  • Tektelic Kona Micro IoT LoRaWAN Gateway
  • The Things Indoor Gateway
  • The Things Kickstarter Gateway
  • The Things Outdoor Gateway
  • Wifx LORIX One

Connect Laird Sentrius™ RG1xx with LoRa Basics™ Station

This section contains instructions for connecting to The Things Stack using LoRa Basics™ Station.

To set up LoRa packet forwarding on the gateway, follow these steps.

Click the LoRa tab in the main menu.

Click on the Forwarder tab.

Choose Semtech Basic Station as the Mode.

Create new server

CUPS

To connect the gateway via CUPS protocol, follow the instructions for Connecting CUPS.

Fill the CUPS Server in the Server Configuration with the CUPS Server Address.

Create new server

Click on the Choose File button to upload the Server Certificate File and key File with the CUPS Server Certificate and CUPS Key File respectively.

Create new server

Click on the Upload Certificates button.

Click Update. If your configuration was successful, your gateway will connect to The Things Stack after a couple of seconds.

LNS

To connect the gateway via LNS protocol, follow the instructions for Connecting LNS.

Fill the LNS Server in the Server Configuration with the LNS Server Address.

Create new server

Click on the Choose File button to upload the Server Certificate File and key File with the LNS Server Certificate and LNS Key File respectively.

Create new server

Click on the Upload Certificates button.

Click Update. If your configuration was successful, your gateway will connect to The Things Stack after a couple of seconds.

← Laird Sentrius™ RG1xx LoRaWAN Gateway MikroTik KNOT →

On this page

  • CUPS
  • LNS

The Things Stack

Getting Started

Devices

Gateways

Integrations

Reference

Contributing

GitHub

Forum

About Us

The Things Network

The Things Industries

About this page

Last changed by Nejra Selimović on 17 Nov 2021.
doc: Remove unnecessary notes, remove old new-in-version tags (#651)

Edit on Github